Sunday, April 2, 2017
Icosa World Laser Engraved Globe
After 2 years of creating truly amazing rubber band guns, Burnt Toys is running another kickstarter campaign. This time it is for the Icosa-World Laser Engraved Globe:
Tuesday, May 5, 2015
Burnt Weapons Rubber Band Guns on Kickstarter
I have started a Kickstarter project for the laser cut rubber band guns I have been working on. There are three models: one semi automatic, one fully automatic, and one that can select between the two firing modes. Check them out an consider backing the project!
Saturday, March 22, 2014
Flite Test FT Racer
Flite Test has some great scratch build RC airplane designs and amusing videos to boot.
I built their "FT Racer." It was simple to build and have been very pleased with the results. Check it out...
I built their "FT Racer." It was simple to build and have been very pleased with the results. Check it out...
![]() |
| cobra18t build of the FT Racer |
Monday, January 6, 2014
Numato.cc has another great Give Away!
Numato.cc is having their 2014 Mega Give Away. You could become the proud owner of one of the many electronic boards they offer. They extended the deadline to this Saturday, get in while you still can!
original post:
http://numato.cc/content/mega-new-year-give-away-2014-grab-your-surprise-gift
update with extended deadline:
http://numato.cc/content/mega-new-year-give-away-2014-list-participants
original post:
http://numato.cc/content/mega-new-year-give-away-2014-grab-your-surprise-gift
update with extended deadline:
http://numato.cc/content/mega-new-year-give-away-2014-list-participants
Monday, May 6, 2013
KNSU Rocket Motor Test with 3D Printed Nozzle Mold
I successfully fired a static test of a KNSU propellant motor. I had it set up to measure the resulting thrust with a load cell and FubarinoSD.
Sunday, May 5, 2013
3D Printed Rocket Nozzle Mold
I have tinkered with small PVC rocket motors using sugar fuels in years past thanks to information posted by Richard Nakka, Dan Pollino, and Jacob's Rocketry. The frustrating part of the build, particularly for smaller diameters, was the nozzle. After building a 3D printer, it was time to print my own nozzle molds.
![]() |
| Nozzle molds on print bed. |
Monday, March 25, 2013
BasicSDAudio Alpha Release and Demo
I have posted an alpha release of the BasicSDAudio library on GitHub! Check it out here. It is capable of 78125Hz stereo PWM audio outputs read from an uncompressed RAW file on an SD card. Psuedo 16bit playback should also be possible.
Also, here is a quick demo of the library running with my BabyBOOMER amplifier/buffer/filter prototype at 78125Hz, 8bit, mono output:
Testers and collaborators are welcome. Future improvements to the library include:
- test stereo pseudo 16 bit playback
- test higher output frequencies
- auto called worker routine
- efficiency improvements
- multiple simultaneous file playback?
Monday, March 18, 2013
RAMPS 1.4 Now Available for $65!
Head on over to the Store and order one today. Any questions? Ask them in the comments section here.
Note that we can only ship to US customers at this time.
Sunday, March 10, 2013
Wine Bottle Hydroponic Planter Tutorial
For Christmas every year, we pick a hand-crafted gift to give to everyone...family, friends, coworkers, the ladies at the sandwich shop...everyone.
Our Yuletide production line was cranking out a fun one this past year, Wine Bottle Hydroponic Planters. Follow these instructions to make your own!
Our Yuletide production line was cranking out a fun one this past year, Wine Bottle Hydroponic Planters. Follow these instructions to make your own!
Monday, February 25, 2013
BabyBOOMER Audio Amplifier and Filter Prototype for Arduino/ChipKit
Here is a prototype of one of my circuit boards for the planned BOOMstick Audio board family. This series was introduced in my previous post. It is intended for use with Lutz Lisseck's SimpleSDAudio Arduino library and my port of that library to ChipKit, BasicSDAudio. Really, it should work for any PWM-based audio system, including the Tone library.
![]() |
| Top side of the BabyBOOMER Audio board prototype |
- small (only 0.56 sqin)
- breadboard friendly (basic 0.1" headers)
- at least 1W speaker output using 8ohm speaker (efficient class D amplifier)
- easily accessible volume control (right out on top)
- lower PWM noise including buffers, filters, and a pseudo 16-bit mode
![]() |
| Bottom side of the BabyBOOMER Audio board prototype |
Time for some real testing!
Sunday, February 24, 2013
$65 RAMPS 1.4 Boards Available Soon!
I will soon have RAMPS 1.4 fully assembled circuit boards available for sale on my Store page.
The price will be $65 USD with free shipping!
![]() |
| RAMPS 1.4 with only SMT components mounted. $65 price is for the fully assembled board. |
I expect to start sales in the next couple weeks, so stay tuned.
At least for now, I am only prepared to make sales to US customers. If you are outside the US and interested in this board, please vocalize your desire in the comments section.
*Assembled in USA*
Saturday, February 23, 2013
Prototyping with OSH Park
Thanks to a tip from an awesome open source project (FreeIMU) a few years ago, I started using DorkbotPDX for circuit board prototypes. Since then, Dorkbot consolodated its PCB fabrication service onto a dedicated site, oshpark.com.
For a flat area rate and free shipping, you can get professional grade circuit boards that not only look good, but are easier to assemble than homebrewed options such as etching or routing. You pay $5 per square inch for 3 copies of a two layer board and $10 per square inch for 3 copies of a four layer board.
I wanted to test some mosfets that I found on Digikey for use with an outdoor laser tag system I am working on. I drew up the circuit and layed it out in Eagle, exported the gerbers and uploaded them to OSH Park.
$1.20 and two weeks later, I had 3 boards in hand, ready to solder.
OSH Park can deliver such great rates for prototype PCBs because it is a panelizer. It collects dozens of different PCB designs in order to fill a much larger panel. This mosaic panel is what is sent to the PCB fabricator. When the panel comes back from the fabricator, it is broken up and sent to the correct addresses. This effectively gives everyone on the panel a quantity discount, even if their order was only a few square inches.
The quality of the boards is superb. If you are looking for prototype PCB service, use OSH Park!
For a flat area rate and free shipping, you can get professional grade circuit boards that not only look good, but are easier to assemble than homebrewed options such as etching or routing. You pay $5 per square inch for 3 copies of a two layer board and $10 per square inch for 3 copies of a four layer board.
I wanted to test some mosfets that I found on Digikey for use with an outdoor laser tag system I am working on. I drew up the circuit and layed it out in Eagle, exported the gerbers and uploaded them to OSH Park.
![]() |
| OSH Park Order Page |
![]() |
| My MOSFET_breakout board ready for breadboard testing |
The quality of the boards is superb. If you are looking for prototype PCB service, use OSH Park!
Wednesday, January 23, 2013
3D Printing from Thingiverse!
So you've got a 3D printer and want to get started printing right away without designing anything? Visit www.thingiverse.com. You can always find something useful or at least interesting to print. Check out some of my early prints on my modified MendelMax 3D printer.
![]() |
| My print of chopmeisters "Roundom Vase" |
![]() |
| My print of Landru's "Rocket Shot Glass" |
Happy printing!
-Thomas
Tuesday, January 8, 2013
BOOMStick Audio Modules
The SnakeEyes V0.02 board has most everything I want but still needs some tweaking. I did not like the 0402 components, so I am going back to 0603. Additionally, I think people are interested in having exactly what they need and not much else in order to save costs. With that in mind, my next iteration of the audio board will actually be a small collection of breadboard-friendly modules:
BOOMStick:
Closest derivative to the V0.02 but only mono output. This will have a buffered SD Card, buffered PWM, improved 1W class D audio amplifier, headphone jack, and volume control.
BabyBOOMER:
Pared down version that scraps the headphone jack and SD card support. This can be paired with the BOOMStick for stereo output. Or, two BabyBOOMERS can be used with a SD-enabled microcontroller, such as the Fubarino SD, for an even more streamlined stereo output with 1W output per channel when using 8ohm speakers.
BabyBOOMER prototype
Speaker:
These will be small breadboard friendly speakers with current limiting resistors
Stay tuned for more development...
-Thomas
Monday, January 7, 2013
SnakeEyes Audio Boards
A few months ago, I started work on an audio board for Arduino and Chipkit microcontrollers. I wanted something that could play good quality sound effects and music with a small form factor.
V0.02 of the SnakeEyes Audio board was born. This used a completely different form factor and used SimpleSDAudio type hardware rather than Wave Shield inspired hardware. It sports Stereo 16-bit 78.125kHz buffered PWM audio generation when using a Chipkit board. The host processor handles all audio generation. It has a headphone jack and thumb wheel volume control as well as two small speakers. There is also the option to use external speakers.
Check for the next post about future audio boards.
-Thomas
SnakeEyes V0.01
My first attempt was a mash up of an Arduino Pro Mini and the same functional structure of the Adafruit Wave Shield. I wanted something that could play all by itself when given a few commands. The host processor would then be free from the low-level audio generation. Small speakers were to be soldered directly to the board in the space above the SD card. This was not a good design from a manufacturing standpoint and frankly, I am not a huge fan of Atmel microcontrollers. I abandoned the project for a while since I was discontent with the results with this board.![]() |
| SnakeEyes V0.01 Audio Board (front and back) |
SnakeEyes V0.02
As noted in some of my previous posts, I found Lutz Lisseck's SimpleSDAudio library for Arduino that used high speed PWM to generate audio from a streamlined SD library. I have a working port of the library to the Microchip-based PIC32 Chipkit processors. The library is very simple and requires very little hardware to get basic functionality. To get higher quality sound, however, more circuitry is necessary.V0.02 of the SnakeEyes Audio board was born. This used a completely different form factor and used SimpleSDAudio type hardware rather than Wave Shield inspired hardware. It sports Stereo 16-bit 78.125kHz buffered PWM audio generation when using a Chipkit board. The host processor handles all audio generation. It has a headphone jack and thumb wheel volume control as well as two small speakers. There is also the option to use external speakers.
![]() |
| SnakeEyes V0.02 Audio Board |
Check for the next post about future audio boards.
-Thomas
Sunday, December 16, 2012
FubarinoSDt
Great news! I have completed a prototype of my edited FubarinoSD board, the FubarinoSDt.
This prototype offers minor edits to FUBAR Labs' Fubarino SD 1.4. The most notable changes from a user perspective is that it has:
FubarinoSDt Prototype
This prototype offers minor edits to FUBAR Labs' Fubarino SD 1.4. The most notable changes from a user perspective is that it has:
- 512k program memory, versus 256k
- 800mA rated current for the 3.3V regulator
- The card detect pin on the new SD card adapter is routed to A14, a change notification pin that can generate an interrupt on change.
- Blue LED on pin 21...you gotta love the blue.
Sparkfun's locking headers and slightly different parts were used for cost reasons, but the impact on the user should be minimal.
EmbeddedMan, one of the creators of the FubarinoSD, provided the bootloader for the new 512k PIC32 and it seems to work just as expected.
I will post a video of it running my BasicSDAudio library soon.
-Thomas
Saturday, November 3, 2012
Fubarino SD - New PIC32 Dev Board on the Block
Fubarino SD
For those that have not seen it yet, the Fubarino SD is a breadboard friendly, MPIDE (forked from Arduino IDE) programmable, PIC32-based development board from FUBAR Labs.It is based on the PIC32MX440F256 which means that it runs 80MHz, has 256k Flash, and 32k RAM. There is a micro SD card socket on board connected to the PICs hardware SPI port. It also has USB OTG which means no FTDI serial interface and therefore faster serial communication. This direct USB interface is similar to the newest Arduino, Leonardo.
Fubarino SD avalaible at Seeed Studio Bazaar
With the great performance expected from this chip and the support that already exists for the board in MPIDE, I definitely plan on testing one or two out.
The SDt Version?
I have completed a new layout of the Fubarino SD to incorporate a few features that I want as well as support the packages for the parts I have available for build up of a couple boards. For lack of a better name, I am referring to it as the Fubarino SDt. Since I have just modified a few things, I thought I would toss my initial in there.So what is different?
- Changed packages for crystal and diodes to match what I have available
- Used a different SD socket and brought the Card Detect out to a change notification pin
- Used a 800mA regulator for just a little more *umph*
- Used Sparkfun's locking headers so breadboarding does not require soldering
- Minor layout changes to adhere to my board fabricators design rules
- I also plan on using the PIC32MX440F512, which has 512k flash memory.
-Thomas
Friday, October 26, 2012
BasicSDAudio ChipKit Library
I have been working on a few Arduino and Chipkit projects that could use some decent audio generation. Many people have used Adafruit's Wave Shield in the past, but I dislike the idea of having to bit-bang the second SPI port, it requires additional hardware, and there was no simple way to port the library over to ChipKit.
SimpleSDAudio minimal setup
The library code is pretty straightforward so it was easy to go in an change ATMEGA specific code for the Arduino to PIC32 specific code for the ChipKit. I have an preliminary version working, so check it out:
The audio in the video is 8 bit stereo, sampled at 78.125kHz. Without using any more pins, the ChipKit will be capable of 10bit output at this sample rate, and 11bit output at 39.062kHz. The Arduino is only capable of 8 bit stereo when using only two PWM pins.
For more information about the SimpleSDAudio library for Arduino, visit:
http://www.hackerspace-ffm.de/wiki/index.php?title=SimpleSDAudio
-Thomas
Sunday, May 6, 2012
Adventures at Home Depot
Home Depot is always fun, so many opportunities to remind Thomas why he shouldn't bring his wife.
I think HD got wise, though. Why else would they carry orchids for $9.99 and put them right at the entrance? Have you ever seen a mom promise her child a treat if they are on good behavior at the store? Yeah, it's like that.
First on the list, propane for those Summer barbecues. Next, dirt for the garden.
Last year, Thomas had a very cool, very space-station looking hydroponic setup in the back yard. The problem, though, was that instead of having to constantly monitor water volume, he had to constantly monitor water temperature, chemical and PH levels.
That plus the wind. A plant the has a constant water supply grows quickly, but the stems aren't so strong. After loosing much of the garden to previously mentioned issues, one day the pepper plant snapped in half. So did my guy's will power to continue hydroponic gardening in the desert.
It wasn't a complete loss, Thomas grew enough jalapenos and bell peppers to make a batch of hot sauce. We also had an abundance of mint and basil - it was a pesto and mojito Summer.
This year, back to dirt. Stinky dirt that smells like poop. We picked up a couple bags and also a soaker hose that is made of some kind of canvas-like material so that the water seeps through instead of squirting of out little holes. Clever.
Then, we head over to the PVC aisle, wifey following at a distance because she's looking at flowers and wants to stay away from the stinky poop dirt in the cart.
Thomas has a question, walks away to find someone in an orange apron. It takes us a while to track one down. I see a stack of orange bucket lids, and they look very much like frisbees. I pick one up. No, remember the orchid. Put it back down.
Finally, I see an orange apron in another aisle and smile at him. He says "Do you need help?" I lead him to my guy and say "I got one! I got one!" Good wifey, but this guy didn't know the answer. Should I fetch another one? No, it's okay.
I leave them and their PVC and stinky poop dirt to go sit down in the windows and doors department where there are tall chairs to sit on.
A few minutes later, Thomas is done and he heads toward the door, patting his leg and whistling for me to come. I gallop after him. Good wifey, happy with her pretty new orchid.
I think HD got wise, though. Why else would they carry orchids for $9.99 and put them right at the entrance? Have you ever seen a mom promise her child a treat if they are on good behavior at the store? Yeah, it's like that.
First on the list, propane for those Summer barbecues. Next, dirt for the garden.
Last year, Thomas had a very cool, very space-station looking hydroponic setup in the back yard. The problem, though, was that instead of having to constantly monitor water volume, he had to constantly monitor water temperature, chemical and PH levels.
That plus the wind. A plant the has a constant water supply grows quickly, but the stems aren't so strong. After loosing much of the garden to previously mentioned issues, one day the pepper plant snapped in half. So did my guy's will power to continue hydroponic gardening in the desert.
It wasn't a complete loss, Thomas grew enough jalapenos and bell peppers to make a batch of hot sauce. We also had an abundance of mint and basil - it was a pesto and mojito Summer.
This year, back to dirt. Stinky dirt that smells like poop. We picked up a couple bags and also a soaker hose that is made of some kind of canvas-like material so that the water seeps through instead of squirting of out little holes. Clever.
Then, we head over to the PVC aisle, wifey following at a distance because she's looking at flowers and wants to stay away from the stinky poop dirt in the cart.
Thomas has a question, walks away to find someone in an orange apron. It takes us a while to track one down. I see a stack of orange bucket lids, and they look very much like frisbees. I pick one up. No, remember the orchid. Put it back down.
Finally, I see an orange apron in another aisle and smile at him. He says "Do you need help?" I lead him to my guy and say "I got one! I got one!" Good wifey, but this guy didn't know the answer. Should I fetch another one? No, it's okay.
I leave them and their PVC and stinky poop dirt to go sit down in the windows and doors department where there are tall chairs to sit on.
A few minutes later, Thomas is done and he heads toward the door, patting his leg and whistling for me to come. I gallop after him. Good wifey, happy with her pretty new orchid.
Sunday, April 22, 2012
Success!
For a couple weeks we have been receiving more than our usual quota of packages from Hong Kong.
He is building it. His very own 3-D printer. Borrowing another 3-D printer to print some of the parts on, the Cobra runs into a problem... a gear that won't print right.
Finally, today - success! To Wifey, the gears look the same, but that's why she makes banana bread and not plastic machines. What to do with the bad gears? Call up Lady Gaga and sell them to her as sunglasses.
He is building it. His very own 3-D printer. Borrowing another 3-D printer to print some of the parts on, the Cobra runs into a problem... a gear that won't print right.
Frustration.
Finally, today - success! To Wifey, the gears look the same, but that's why she makes banana bread and not plastic machines. What to do with the bad gears? Call up Lady Gaga and sell them to her as sunglasses.
Subscribe to:
Posts (Atom)


















